Catalog | Video |
Dimensions
(In mm. 1 mm = 0.0 393 7 inches)
Work Principle
This is a based weighting solution,It can be used for either analog strtic weighing.No need the indicator,and it has a low cost.Usually,it connects the juncton box between the computer. The signal of some analog load cells wil be magnified after analog adding by the junction box, which will be dealed with by MCU after A/D conversion,then will output to PC by RS232 module. Please refer to following picture.
Note:
Multi-load cells should connect junction box then connect to ATC-108A.
Specification
Item Parameter |
C2 |
C3 |
Unit |
Rated load (Emax): |
20kg~470t |
kg,t,klb |
|
Maximal numbers of load cell verification Intervals (Nlc): |
2000 |
3000 |
d |
Minimum load cell verification intervals Intervals ( Vmin): |
0.02 |
0.01 |
% of rated load |
Sensitivity(Cn ): |
30,000 o r 100,000 |
mV/V |
|
Combined error: |
0.027 |
0.015 |
-% of rated output |
Temperature effect on sensitivity(Tkc): |
0.0024 |
0.0012 |
=% of rated output/ |
Temperature effect on zero balance(Tk0): |
0.002 |
0.0008 |
-% of rated output |
Res olution of A/D (fo r tes t lo ad): |
24 (at 1 Hz)1.0 |
Bit |
|
Res olution of A/D (fo r tes t temperature ): |
8 (at 1 Hz) |
Bit |
|
Measu ring rate: |
50/25 |
/Sec |
|
Baudrate: |
9600/19200 |
Bps |
|
Filter mode 1: |
3~0.05(Low pass filter) |
HZ |
|
Filter mode 0: |
8~3(Low pas s filter) |
HZ |
|
Zero b alance: |
1.0 |
+% of rated output |
|
Ins ulation res istance: |
≥5000 |
MΩ (Mega-Ohms) |
|
Safe overload: |
150 |
% of rated capability |
|
Ultimate o verload: |
300 |
% of rated capability |
|
Operating tem peratu re range: |
-20~+70/-20~+160 |
℃/ °F |
|
Rec ommend excitation: |
7~ 12 |
V(Only DC) |
|
Maxim um exc itation: |
15 |
V(Only DC) |
|
Material of ela sto mer: |
A lloy ste el / Stainless stee l |
||
Pro tec tion cla ss: |
IP67/IP 68 |
||
Citation: |
OIM L R60 / GB7551-1997 |
Hotline.
Ms. Vân Anh - 0904883101