SP0501.02 : Đồng hồ lưu lượng siêu âm | Dòng chảy không đầy ống |
Thông số chính :
Đồng hồ lưu lượng siêu âm | Đo lưu lượng dòng chảy không điền đầy đường ống | Cảm biến đo mức và tốc độ dòng chảy thả chìm | DMDF-OP-B Partially Filled Pipe Flow Meters | DYNAMETERS

CTCP GIẢI PHÁP CÔNG NGHIỆP | Chế tạo thiết bị | Máy móc | Dây chuyền | Thiết bị sấy | Hệ thống pha trộn định lượng | Hệ thống điều khiển khí nén | Tích hợp từ các thiết bị công nghệ Bơm | Van | Cảm biến đo lường | Thiết bị khí nén SMC ( Nhật bản ) | Thiết bị điều khiển PLC của hãng Allen Bradley (Mỹ) SIEMENS ( Đức )
Hãng cung cấp : DYNAMETERS
Model : DMDF-OP-B
Chất lượng : Bảo hành 18 tháng
 Catalog Video

 DMDF-OP -B Partially Filled Pipe Flow Meters

DMDF-OP -B Flow Meter includes flow calculator, DYNAMETERS velocity and level transducer. It is suitable for the flow measurement of pipe outlet and open channel.

Features

1.        Excellent low flow rate measurement ability, low to 0.021 m/s.

2.        Superior measurement accuracy.

3.        4-20mA and RS485/MODBUS output, GPRS is optional.

4.        Very suitable for sewage measurement.

5.        User-friendly configurations.

6.        Complete in specifications, and can provide a variety of applications.

Flow Calculator

The flow calculator can set the calculate the cross-sectional area of partially filled pipe or open channel, for circular pipe, it only need to input the inner diameter; for open channel, it only need to input the width; users also can input up to 20 point coordinates of channel to calculate the cross-sectional area.

The flow calculator can display the velocity, level, flow rate and flow totalizer, and is configured with 4-20mA and RS485/MODBUS output, GPRS is optional.

DYNAMETERS Velocity and Level Transducer

By using digital signal processing techniques, DYNAMETERS velocity and level transducer is able to perform in a wide range of environments. It is used to record flows in pipes, channels and small streams and operates in a wide range of water qualities from fresh streams to primary sewage channels.

DYNAMETERS velocity and level transducer combines water velocity and water depth measurement with a powerful data logger. Its systems have been tested in small streams and pipes, and the calibration has been verified in a tow tank.

DYNAMETERS velocity and level transducer is mounted on (or near to) the bottom of the stream/pipe/culvert and measures the velocity and depth of the water flowing above it.

 When installing transducer, a hoop as shown above is needed, at first, fix the transducer on the hoop, then fix the    component in the pipe, and connect the cable to flow calculator.

Technical Specification

 
 
 
 
 
Lên đầu trang