|
SP05.17 : Van đáy - Van điều khiển - SANITARY
Thông số chính:
Van đáy - Van điều khiển - SANITAR - Tank Bottom Valve
Tư vấn , Thiết kế , Chế tạo dây chuyền – Thiết bị công nghệ , Hệ thống pha trộn - định lượng được tổng hợp từ các thiết bị công nghệ Bơm - Van - Cảm biến , Thiết bị điều khiển Allen – Bradley (Mỹ)
Hãng cung cấp :
Model :
|
 |
Applications
GD3 tank bottom valve is a pneumatic seat valve with sanitary and flexible design. Based on the mature single seat valve design platform, few and simple moving components make the valve reliable, and reduce the maintenance cost. GD3 tank bottom valve is used to close or open the pipe leading to the tank. It is widely used in brewing, dairy, beverage, and pharmaceutical industries.
Operating Principle
GD3 tank bottom valve is remote controlled by compressed air, which consists of one valve and one tank bottom flange. In order to reduce the abrasion of seal components, the compression to seal components is performed through touching between metals.
GD3 tank bottom valve has two configurations.
|
GD3-T tank bottom valve and flange are connected by clamp ends. Loosen the clamp a little, the valve can turn to any position, ensuring high flexibility. Tank bottom flange is welded on the tank.
GD3-F tank bottom valve and flange are connected by bolts. The valve can rotate through 360°. Tank bottom flange is welded on the tank.
Technical Data
|
Metal material
|
Product wetted
|
316L (DIN-1.4404)
|
|
Non-product wetted
|
304 (DIN-1.4301)
|
|
We can provide EN 10204 3.1B certificate.
|
|
Seal material
|
Standard
|
EPDM
|
|
Options
|
NBR, FPM, Silicone
|
|
All seal materials comply with FDA 177.2600.
|
|
Temperature
|
Continuous working temperature
|
-20°C ~ +135°C (EPDM)
|
|
Sterilization temperature
|
150°C (Max 20min)
|
|
Pressure
|
Working pressure
|
0~5bar (standard)
|
|
Accepting high pressure requirement
|
|
Control air pressure
|
5~8bar
|
|
Surface treatment
|
Internal surface
|
Ra≤0.8µm
|
|
External surface
|
Shot blasting
|
|
Connection
|
Connection standards
|
Welding end: DIN 11850 series 2
|
|
Welding end: Inch pipe diameter standard
|
|
Connection methods: welding, thread, clamp, flange
|
|
Options
|
Smart controller
|
24V DC
|
|
Solenoid valve (1 or 2)
|
|
Position sensor
|
24V DC
|
|
NPN/PNP position sensor (2)
|
Body Configurations
|
In trang